Re: [plug] Tape backup solution?

Top Page
Attachments
Message as email
+ (text/plain)
Author: Bernd Felsche
Date:  
To: plug
Subject: Re: [plug] Tape backup solution?
"Keith Bawden" <keith@???> wrote:
>On Tue, Aug 19, 2008 at 19:58, Fred Janon <fjanon@???> wrote:
>> Since a thread was started on RAID, I was wondering if someone
>> knows where the tape backup solutions are now. What the tapes
>> capacities are and what approximate cost for the drive and the
>> tapes. I am doing backups on CDs and DVDs but I cannot backup
>> entire drives anymore.


>Tapes vary greatly in size and price. Up to at around 400 GB per tape
>for LTO-3 (I have not used anything larger myself). However, tapes are
>generally quite expensive.


>A cheaper alternative for home use might be to invest in an
>e-SATA/firewire/USB type setup. You can play around with some udev
>rules and have a backup job auto kick off on hotplug.


>I have seen 1 TB SATA drives go for around AUD 250 or so. This is
>substantially less that the cost of single LTO3 tape and the required
>drive (and SCSI controller if needed).


>The draw back with backing up to hdd is that you will more often than
>not leave the backup medium on site after each backup. In the even of
>a fire or whatever you will loose everything...


Perhaps even lose it.

Buy several external drive units. Take one to site in the morning
and take the one from the previous night offsite when you leave.
The maximum loss will be 2 days if you forget at the worst possible
time.

It's the same procedure as taking tapes offsite.
-- 
/"\ Bernd Felsche - Innovative Reckoning, Perth, Western Australia
\ /  ASCII ribbon campaign | Science is the belief in
 X   against HTML mail     | the ignorance of the experts.
/ \  and postings          |  -- Richard Feynman

_______________________________________________
PLUG discussion list: plug@???
http://www.plug.org.au/mailman/listinfo/plug
Committee e-mail: committee@???